Do you ever wonder about best multimeter with amp clamp is used when measuring current? As any electrician will tell you, a multimeter with an amp clamp is the only way to go. But there are so many out there that it can be difficult to know where to start. Don’t worry—we’ve done the research for you and compiled a list of our five favorite best multimeter with amp clamp. Keep reading to find out which one suits your needs best!
Table of contents
How To Choose The Best Multimeter With Amp Clamp
Choosing the best multimeter with an amp clamp requires a few factors to be taken into consideration:
- You should decide what type of measurements you need to make and what kind of environment you will be using it in. Multimeters can have varying degrees of accuracy, so focus on one that will suit your needs.
- Check if the device comes with an amp clamp or not. The ammeter used must be sensitive enough for reliable measurements; otherwise, you’ll end up with inaccurate results.
- Look for features such as backlit displays, auto-ranging capabilities, and data storage options which may come in handy depending on your application.
Design
Multimeters have many different functions depending on their design and purpose, but generally speaking, they are used for measuring voltage (volts), current (amps), resistance (ohms), and capacitance (farads). Depending on how much power they draw while running off batteries, determines the optimal life span of the product, meaning more battery power means a greater life span but more expensive product costs due to higher initial investment in batteries quality & quantity purchase cost-wise.
Advanced Features
In order to increase its versatility, look for advanced models featuring additional features like thermocouples support that allows temperature readings directly from probes without having them connected first, along with audible continuity tests or diode tests which come very useful when working with sensors or integrated circuits ICs – analyzing them prior soldering/desoldering operations being a good example hereof these two latter ones!.
Safety Measures
Finally, consider safety measures like rubberized insulation around probes’ handles & special pocket-sized holsters/casing to store them away conveniently as well as protect against external hard impacts once not in use anymore, avoiding unwanted shocks, either human-related ones accidentally caused by static electricity discharge buildup over mishandling procedures OR by short circuit related ones due cable shorts happening near electronic components going through servicing operations!
Top 5 Best Multimeter With Amp Clamp
1. Fluke 323 Clamp Meter – Best Clamp Multimeter for Outdoor Use
The Fluke 323 Clamp Meter is an excellent tool for electrical troubleshooting. It accurately measures AC current up to 400 amp, AC and DC voltage up to 600 v, as well as resistance up to 4 kilo ohms. Moreover, its true RMS sensing feature ensures precise readings while measuring linear or non-linear loads, no matter the waveform.
It also has a wide jaw opening of 30 millimeters, allowing users to measure current without touching or interrupting the circuit. Its resistance accuracy is 1.0% ± 5 digits, making it a reliable piece of equipment for anyone dealing with electricity in their line of work. The Fluke 323 Clamp Meter is an essential tool for any electrician’s tool kit.
This piece of equipment allows users to safely and accurately measure current flow and voltage in a wide range of applications. With an audible continuity sensor that confirms a circuit’s ability to conduct electricity, it provides extra assurance while you work.
Additionally, this clamp meter is built to standards far above average — meeting IEC safety standard 61010 1 and being rated for CAT IV installations at 300V and CAT III installations at 600 V; its durability assures many years of use. If you’re looking for a reliable, easy-to-use clamp meter, the Fluke 323 is a perfect choice.
Specifications:
Display Counts: 4000
Auto/Manual ranging: Yes
AC/DC Voltage measuring range: 600V
AC/DC Current measuring range: 400A
Resistance: 0 to 400.0 Ω /4000 Ω
Frequency: 45 Hz to 65 Hz
Pros:
- The true RMS sensing meter
- Audible continuity sensor
- Jaw opening measures current
- 2 year warranty
Cons:
- It doesn’t measure hertz
2. KAIWEETS HT208D Inrush Clamp Meter – Best Budget Friendly Amp Clamp meter
The KAIWEETS HT208D Inrush Clamp Meter is a multifunctional tool designed to make the lives of engineers, technicians, and even home users much easier. This device accurately measures AC/DC current up to 1000A and voltage up to 1000VAC/DC, as well as frequency, duty cycle, resistance, capacitance, diode testing, continuity testing, and temperature. It even has the unique ability to measure inrush current accurately!
Knowing the value of inrush current can help you identify potential problems quickly—all you need to do is set it up and wait for it to work its magic. Whether used in a lab or around your own house, the KAIWEETS HT208D Clamp Meter is an invaluable tool.
The KAIWEETS HT208D Inrush Clamp Meter provides highly reliable and accurate readings with safety standards that guarantee protection against electric shock. This versatile meter offers advanced functions like Variable Frequency Drive Filtering (VFD) and low Input Impedance (LoZ) modes, giving professionals the performance they need for any industry application.
Furthermore, the built-in Non-Contact Voltage (NCV) Detector can quickly determine whether there is voltage, and a convenient LED flashlight provides illumination when needed in dim environments. Furthering its durability, it comes with a 36-month product service backed by dedicated 7/24 customer support. With the KAIWEETS HT208D, businesses can trust their operation always to stay safe and efficient.
Specifications:
Display Counts: 6000
Auto/Manual ranging: Yes
AC/DC Voltage measuring range: 1000V
AC/DC Current measuring range: 1000A
Resistance: 60 MΩ
Frequency: 50Hz
Capacitance: 100mf
Pros:
- True-RMS Clamp Meter
- Inrush Current Meter
- NCV Detection & LED Flashlight
- Advanced Functions
Cons:
- The display is a bit hard to read outdoors
3. Klein Tools CL800 Digital Clamp Meter – An All-in-one Clamp meter
Klein Tools CL800 digital clamp-meter is the ultimate device for electricians looking to easily and accurately measure AC/DC voltage, resistance, continuity, frequency, capacitance, and even test diodes. Powered by TRMS technology, this device ensures that all measurements are accurate and reliable. And with its LoZ mode, you can quickly identify and eliminate any ghost or stray voltages encountered during tests. Furthermore, Klein Tools has developed its Test and Measurement product line exclusively for electricians – so rest assured that the CL800 is more than qualified to help you out with all your electrical tasks.
The Klein Tools CL800 Digital Clamp Meter is a must-have for any electrical job. This device not only measures current but also temperature, thanks to its thermocouple probe. Whether you’re working at home or on the job site, this clamp meter has you covered with its double-insulated safety rating and lower impedance mode to eliminate ghost or stray voltages.
Additionally, it is built tough to withstand a 6.6′ drop and can operate in temperatures of 32-104 degrees Fahrenheit. One of the best features of this device is that it features a low battery indicator and an easily accessible battery compartment. No matter your project or environment, trust the Klein Tools CL800 Digital Clamp Meter to provide accurate readings every time!
Specifications:
Display Counts: 6000
Auto/Manual ranging: Yes
AC/DC Voltage measuring range: 1000V
AC/DC Current measuring range: 600A
Resistance: 60MΩ
Frequency: 1Hz – 500 KHz
Capacitance: 6000µF
Pros:
- Clamp Meter with automatically ranging true mean squared technology
- Built to withstand
- Low battery indicator
- Easy to use
Cons:
- Can’t calibrate leads
4. Intendvision Digital Clamp Meter – Best for Calibration Use
The Intendvision Digital Clamp Meter is an incredibly versatile tool with a variety of measurements like 1000 Amp AC/DC Current, 1000V AC/DC Voltage, Frequency, Duty Cycle, and much more. On top of all this, it also features easy-to-use functions such as Last Data Hold and Max./Min./Relative value so that you can easily review readings without needing to take multiple measurements at the same time. Furthermore, its ability to measure inrush current, alongside being made from high-quality ABS material with a large LCD screen, makes it one of the most accurate tools for professionals looking for quick diagnosis results for motor and starting circuit errors.
Moreover, the Intendvision Digital Clamp Meter is an up-to-date, reliable device for DIYers and professionals alike. With its array of advanced functions, complete range overload protection, and data retention abilities, it’s easy to see why this might be your go-to clamp meter. The built-in Non-Contact Voltage (NCV) Detector makes finding hidden circuits a breeze.
Plus, a convenient LED flashlight illuminates dim areas. The multimeter is designed to be compact, lightweight, and easy to store while having impressive reliability and safety features that can provide higher accuracy readings. Ideal for many applications such as frequency conversion power supplies and refrigeration equipment, you can’t go wrong with the Intendvision Digital Clamp Meter!
Specifications:
Display Counts: 6000
Auto/Manual ranging: Yes
AC/DC Voltage measuring range: 1000V
AC/DC Current measuring range: 1000A
Resistance: 60 MΩ
Frequency: 10MHz
Capacitance: 100mF
Pros:
- True-RMS Digital Clamp Meter
- Easy to Operate
- Wide Application
- Compact design
Cons:
- It does not come with a stand
5. Klein Tools CL700 Autoranging Digital Clamp Meter – Best Clamp meter For Commerical Use
The Klein Tools CL700 Autoranging Digital Clamp Meter is a wonderful choice if you’re looking for a high-performing clamp meter. Although, this technologically advanced meter includes Automatic Ranging with True Mean Squared (TRMS) technology for increased accuracy and precision. Plus, its jaw opens big enough to wrap around large conductors of up to 40 millimeters and even comes with an integrated thermocouple probe to measure temperature.
Moreover, Test leads measure AC/DC voltage, resistance, continuity, frequency, and capacitance, as well as diodes and low impedance (LoZ) mode can be used to identify and eliminate ghost or stray voltages. Lastly, this incredible device has excellent safety ratings, including CAT IV 600V, CAT III 1000V, and Class 2 insulation double insulation. The Klein Tools CL700 Autoranging Digital Clamp Meter is a must-have for professionals in the electrical industry.
Not only is it built to withstand drops up to 6.6 feet (2 m), but its low battery indicator, accessible battery compartment, carrying pouch, test leads, thermocouple with adapter, and batteries mean it can be taken on any job safely and effectively.
Additional, Working in various environments no longer needs to be an issue either. This clamp meter meets all requirements for use in basic and controlled electromagnetic environments, from residential areas to office spaces and even light industrial locations. With its wide operating temperature range of 32 degrees F to 104 degrees F (0 degrees C to 40 degrees C), nothing can stand in your way of tackling that electrical project – safely and efficiently!
Specifications:
Display Counts: 6000
Auto/Manual ranging: Yes
AC/DC Voltage measuring range: 1000V
AC/DC Current measuring range: 600A
Resistance: 60 MΩ
Frequency: 1Hz – 500 KHz
Capacitance: 6000µF
Pros:
- Electronic Tester’s clamp
- Low Impedance (LoZ) mode
- easily accessible battery compartment
- Low battery indicator
Cons:
- Can’t read DC current amps
Bottom Line:
If you’re looking for the best multimeter with amp clamp, look no further than our list of five favorites. We’ve got a great selection of options to suit a variety of needs and budgets, so you’re sure to find the perfect one for you. As always, be sure to read the reviews before making your purchase to ensure that you’re getting exactly what you need. Thanks for reading, and happy shopping!