Fluke T5-600 Multimeter Review-Honest Guide

Looking for an accurate and reliable multimeter? Then it would be best to look at the Fluke T5-600 Multimeter Review. This powerhouse of a device is perfect for both experienced electricians and do-it-yourselfers alike, boasting features like an open junction, low pass filter mode, and continuity buzzer to make sure all your power quality testing gets done quickly – and reliably. 

With its rugged construction, the Fluke T5-600 can handle even the toughest jobs – so you know it’s up to any task you throw at it. Its outstanding reputation as one of the top meters on the market today has been well earned – based on performance, accuracy, and reliability! 

Get yours today by checking out this post for more details about why you need a Fluke T5-600 in your toolbox!

Fluke T5-600 Multimeter Review | Basic Info

Fluke T5-600 Multimeter

The Fluke T5-600 Multimeter has a great feature set and is ready to take on anything you throw its way. It offers 600V AC/DC Voltage, 100A AC Current, Continuity under 25 ohms, and 1000 ohms of Resistance. 

Its calibration frequency is 45 to 66 Hz, with a 0.5-inch jaw capacity and a whopping 1000 counts. You can also enjoy auto-ranging, audible continuity, data hold, and auto power-off features – plus an LCD display for easy reading.  If you want to know about Fluke T5 higher model, click here!

Further features include an AC current accuracy of 1.5% + 2 Digits and an operating temperature between 14 to 122 degrees F – all powered by (2)AA Batteries with safety rating CAT III 600V included in the package. Batteries and instructions come included with your purchase.

Key Features

  • Automatically measures volts ac and volts dc
  • Display 1000Ω of Resistance
  • User-friendly OpenJaw current measurement
  • Optional holster attaches
  • Can stay connected much longer
  • Continuity beeper
  • Compact design
  • Detachable SlimReach™ probe tips
  • Safety: 600 V ac/dc, CAT III
  • Auto off mode

Things That’s Included

  • Voltage, Continuity, and Current Tester
  • 4 mm Detachable Probes
  • Manual

Fluke T5-600 Multimeter General Specifications

Jaw Opening12.9 mm (0.5 in)
Current Range AC rms0 to 100.0 A
Voltage Range0 to 600 V
Resistance Range0 to 1000 Ω
Continuity beeper thresholdOn at < 25 Ω, off at > 400 Ω
CAT RatingCAT III 600 V, 100 A ac
Size30.5 x 51 x 203 mm
Warranty2 year
Battery Life200-hour zinc chloride, 400-hour alkaline
Low Battery IndicatorYes

Fluke T5-600 Review | Features

Compact Design

The Fluke T5-600 Compact Design is a marvel – it fits perfectly into a small pocket or your tool bag, yet it still provides great electrical capabilities. 

This tester is easy to use and yields quick results – whether you’re testing voltage levels, current draw, or continuity, you’ll have the answers in no time! Plus, the slim design allows for comfortable usage without sacrificing accuracy. All this combined makes the Fluke T5-600 Compact Design one of the best testers today. Do you know about the difference between the Fluke T5-600 vs. T6-600, check out here!


If you’re an electrician, you know the importance of having a reliable tester with multiple functions. That’s why the Fluke T5-600 Multifunctional is such valuable electrical testing equipment! 

It can test voltage, continuity, and current all in one, and it’s an auto select feature that switches between AC and DC voltage for added safety and convenience. Make sure to have one of these by your side – it could mean the difference between success or failure during a critical job.

OpenJaw Current Measurement

There is no need for awkward positions or shock risks – the Fluke T5-600 OpenJaw has revolutionized current readings! It allows current measurement without contact and can measure up to 12.9 mm (or 0.5 inches) of diameter wire. 

This means you don’t have to sweat over breaking the circuit, making it much easier and faster to take readings, which might be essential in various commercial settings. So, if you need highly precise readings with zero contact between the device and circuit, look no further than the Fluke T5-600 OpenJaw!

Measure Without Breaking The Circuit

The Fluke T5-600 is a must-have tool for electrical installations and repairs. This device eliminates the need to break the circuit when checking on amperage, allowing technicians to quickly and reliably take readings of appliances, motors, compressors, and other equipment with no hassle. 

With its simple-but-accurate design, the Fluke T5-600 can save time both in installation and diagnostics. Plus, you can rest assured that all results are accurate. So if you’re an electrical technician or engineer looking for precise readings without breaking a circuit, the Fluke T5-600 is worth checking out!

Rugged And Reliable

The Fluke T5-600 is your new go-to tool. Why? It’s reliable and easy to use, making troubleshooting faster and less tedious. On top of that, it’s impressively rugged. This bad boy has been tested to take a 10 ft (3 m) drop and continues working! 

No matter the job site conditions, you can trust the Fluke T5-600 to get the job done right – and no need to worry about a broken tool in the process!

Continuity Beeper

The Fluke T5-600 Continuity beeper is a must-have for any serious electrician. It helps you detect and troubleshoot electrical malfunctions quickly and accurately. This device buzzes to alert you when the circuit has been completed, making it easier to test power sources, breakers, switches, and other wiring components in no time. 

Plus, with its bright LED flashlight and auto-ranging voltage capabilities, this tool can take your projects to the next level with professional results every time. From residential remodels to heavy-duty industrial builds, the Fluke T5-600 offers top-of-the-line performance that will help you work smarter and faster.

Detachable SlimReach™ probe Tips

The Fluke T5-600 Detachable SlimReach™ probe tips are convenient for electricians and technicians alike! Customized specifically for national electrical standards, these innovative tools will save time and make it much easier to diagnose complicated electrical issues. 

Lightweight and slim, they fit easily into tight spaces without worrying about slipping or snagging wires – which can be especially frustrating when dealing with complex circuitry. Not to mention they still produce reliable and accurate results when used properly! 

Stay one step ahead of the competition by investing in a few Fluke T5-600 Detachable SlimReach™ probe tips today – you won’t regret it.

Data Hold

If the need for accurate and instantaneous readings is important to you, then look no further than the Fluke T5-600! With its ability to ‘data hold’ — capturing a measurement and displaying it on its LCD so it can be recorded. 

The T5-600 ensures you get all your info the first time. It’s Smart Sensor lighting that guides user operations, adding another layer of convenience when checking different parameters fast, too. So if there’s data out there that needs capturing, the Fluke T5-600 has got you covered!


The Fluke T5-600 offers the ultimate safety protections with all inputs rated EN61010-1 CAT III 600 V and Overvoltage Category 600 V ac/dc, CAT III. 

In other words, you can rest easy knowing that you’re completely protected from spurious electrical spikes. Plus, UL and CSA certifications make this device a reliable choice for any work environment.


  • LCD display
  • Check voltage, continuity, and current
  • Compact size
  • Tough test leads
  • Detachable Slim Reach test probes
  • The test leads accept optional accessories
  • Rugged and reliable


  • Cant measure amps between A+N with the test probes
  • Can’t read higher resistance values

Things That Are Unimpressive In Fluke T5-600

When it comes to the Fluke T5-600, there are a couple of things that could be more impressive. The leads that come with the meter are quite large and unwieldy, making it difficult to read small terminal voltages. 

Also, the probes feel too loose, unlike other brands, which lock firmly in place. While these issues can be inconvenient at times, they don’t prevent the Fluke T5-600 from being an excellent all-around multimeter.

Who Needs Fluke T5-600?

Electricians and other professionals who work with electricity need reliable tools that meet the highest standards, which is why the Fluke T5-600 is so popular. With its exceptional accuracy, while still being easy to use, it’s an important choice for those in the know. 

It features simple diagnostic functionality, a clear results display, and a range of testing capabilities at competitive prices. Whether for professional or personal protection and safety reasons, investing in one of these devices is a must for anyone working with electricity. 

Not only does it save time and effort, but it also provides accurate readings for maximum confidence when inspecting or troubleshooting electrical systems.

Users’ Opinion About Fluke T5-600 Digital Multimeter

People are genuinely impressed with the Fluke T5-600 Digital Multimeter. With a 4.8 rating on Amazon, users find many benefits to adding this meter to their tools. It has so much versatility that it can handle most tests and miles over other meters when it comes to durability and accuracy. 

Even inexperienced users have been able to master its basic functions fairly quickly owing to its intuitive design. The heavy-duty test leads also make a great impression on users as they know they last much longer than the traditional pairs they would otherwise use. 

If you’re looking for a reliable, easy-to-use, and compact tester, the Fluke T5-600 should be your first pick.

Final Verdict 

Overall, the Fluke T5-600 is an incredibly rugged and reliable multimeter for any electrician or technician. Thanks to its user-friendly features, technicians can work with confidence and accuracy every time. 

The dual display helps you keep track of measurements as you troubleshoot circuits, while the IP67 waterproof rating will keep you working in any weather condition. The LED backlight makes it easy to work in lower lighting conditions, and its user-adjustable auto ranging is great for on-the-go repairs. 

All in all, this multimeter is worth saving up for. Its durability, precise accuracy, and extensive range of features make it one of the best multimeters for electricians who need a reliable device for professional jobs or everyday repairs.

Fluke T5-600 Multimeter Review FAQs

Does Fluke T5 600 measure DC current?

The T5 600 does it all! With the ability to check AC/DC voltages and amps, plus ohms and continuity, this tool has got you covered.

How do you use a Fluke T5 600 multimeter?

All you need to do is twist the dial to select the function you want and connect the leads across the terminals you want to measure. The display will show your result in an easy-to-read format, so you can ensure you’ve got the right reading in no time. It’s really that simple – an awesome kit for any engineer or technician!

What is the difference between Fluke T5 and T6?

If you want to measure current in a circuit, the T5 open jaw is your go-to. But if you need an accurate read of both current and voltage levels, you should opt for the upgraded T6 – it has real-time measurement readings that can’t be beat! And don’t forget about those probes; they come in handy when measuring volts using the humble T5.

How do you calibrate a Fluke T5 600?

To start your process, press and hold the “Min/Max” button on the meter. Then click the “Auto/Hold” once – when you’ve done this just right, wait for a special display reading of ‘C-01.’ After that’s up? Connect it all to the calibration tool!

How to replace leads on a Fluke T5 600?

To change out test leads on the T5-600, look no further than its backside. After unscrewing a visible screw in the base of the assembly, you can gently pull it off for easy replacement with your brand new T5-RLS – plug it right in and secure it with that same trusty screw!